Amarillo Pavement Pros: Crushed Asphalt and Asphalt Millings in Amarillo, TX
Crushed asphalt is old pavement broken back down, and two loads both called millings can look quite different.
- Amarillo and 20 miles around
- Licensed, insured local contractors
- Typical price ranges on every page
- Ask for a written price first
- City and TDLR rules explained
Amarillo Pavement Pros explains crushed asphalt and asphalt millings for Amarillo property owners: rural driveways, parking pads, ranch lanes, equipment yards and the apron in front of a shop. Much of it comes from milling, where a machine grinds the worn surface off a road or lot, covered on the asphalt milling in Amarillo page. It is sold as millings, crushed asphalt, recycled asphalt and RAP, short for reclaimed asphalt pavement.

A millings driveway installed at $3 to $8 per sq ft without hot mix priced alongside can cost what HomeBlue put a new Amarillo asphalt driveway at, $3 to $6 per sq ft, for loose recycled material instead of pavement.
What You Get in a Load of Millings
What the milling drum takes off is the stone and binder of the old surface, in small pieces. Some yards screen or crush it to an even size; others sell it as it came off the job. Ask which you are buying, and see it before delivery: until you know what is in the load, the price per ton tells you little.
Two claims are repeated so often they read like fact: that millings re-bond in summer heat, and that they make a good base under new asphalt. Neither is a promise to buy on.
Crushed Asphalt Prices by the Ton, Yard and Square Foot
Millings are sold by the ton and by the cubic yard, so check the unit on every quote: a low per-yard figure and a high per-ton figure can describe the same load. The figures are ThePricer's national ones, not Panhandle rates.
The installed figure overlaps HomeBlue's 2022 Amarillo figure for asphalt driveway paving, so price both. Ask whether a price covers material alone, delivered, or spread and rolled, and get each line in writing.
$10 to $40 per ton
Asphalt millings, picked up. Haul distance, depth, grading, rolling, edging and what the ground underneath needs move the number, and supply depends on what a local yard has on hand.
| Job | Typical range | Figure from |
|---|---|---|
| Asphalt millings, picked up | $10 to $40 per ton | ThePricer, 2026 |
| Asphalt millings, delivered | $15 to $60 per ton | ThePricer, 2026 |
| Asphalt millings, per cubic yard | $12 to $32 per cubic yard | ThePricer, 2026 |
| Millings driveway, installed, residential | $3 to $8 per sq ft | ThePricer, 2026 |
| New asphalt driveway incl. removal, Amarillo, residential | $3 to $6 per sq ft | HomeBlue, 2022 |
Laying a Millings Drive So It Sheds Water
The Asphalt Pavement Alliance makes the drainage point for parking lots: drainage that removes water quickly reduces the water reaching the subgrade and the movement during freeze-thaw cycles. The same holds for a millings drive. Give it a slope or crown, keep it out of the lowest part of the property, and define the edges so material is not pushed into the yard.
Amarillo Building Safety lists driveways within private property lot lines as needing no permit, excluding the approach. In Canyon or outside city limits, ask that city or the county.
Millings, Freeze-Thaw and the Caprock
A millings surface is not sealed the way hot mix is. Water finds the ruts and low spots, and NOAA's Engineering Weather Data for the Amarillo station (1973 to 1996 record) averages about 85 freeze-thaw cycles a year.
The Handbook of Texas describes the caprock of the Llano Estacado, the plateau Amarillo sits on at 3,606 feet, as a hard layer of impervious material, commonly called caliche. Water that cannot soak down runs off, so the shape of the drive does most of the drainage work. That caprock is also the material for caliche roads, the natural alternative to millings.
Signs Your Drive Is Ready for a Millings Top
- The gravel drive turns to ruts after rain
- Loose stone is everywhere and the drive is getting thin
- Water sits in the low spot by the gate
- The drive is soft where the truck turns
- Material keeps spreading into the yard
Plan a Millings Drive in Amarillo
Measure the length, width and depth you want, and call for typical millings costs and what to ask the yard.
Call (806) 375-4850Crushed Asphalt Available In
Amarillo and the qualifying towns inside the 20-mile service area.
- Amarillo
- Canyon
Related guides: Commercial Asphalt Paving Cost in Amarillo, TX and What to Expect From a Commercial Paving Project.
Frequently Asked Questions
Crushed Asphalt Questions in Amarillo
Is crushed asphalt sold by the ton or by the yard?
Both. ThePricer gives $10 to $40 per ton picked up, $15 to $60 per ton delivered, and $12 to $32 per cubic yard. Check the unit on every quote.
How much crushed asphalt do I need for my drive?
The supplier turns length, width and depth into tons or yards. Give them the measurements and ask for the quantity in writing.
Will crushed asphalt harden like pavement in the summer heat?
You will read that it does, but it is not something to count on. Ask anyone who promises it how they know.
Can millings go over my existing gravel or caliche drive?
It depends on the drive underneath. One that is soft, rutted or sits in a low spot carries those problems up into the new layer.
What should I price alongside millings?
Hot mix asphalt and caliche. Where the aim is a sealed, stone-faced surface over a sound base, chip seal is a third option.
Does a millings price include rolling it?
Not always. Ask whether a delivered price covers material and haul only, and whether an installed price includes grading and compaction.
