Amarillo Pavement Pros: Commercial Pavement Services in Amarillo, TX
Crack sealing, sealcoating, patching, overlay, striping, accessibility work and rebuilding. Each has its own page with what it is for and what it usually costs.
Amarillo Pavement Pros covers the whole commercial pavement lifecycle in Amarillo, TX, from the cheapest preventive work through to rebuilding a lot that has run out of life. Calls are taken for Amarillo, Canyon and 20 miles around them, and the work itself is quoted and done by independent local contractors.

Buy the cheapest work your lot actually needs
The groups below run roughly from cheapest to dearest. That order is deliberate, because the most common and most expensive error in commercial pavement is buying work from further down the list than your lot actually needs, or leaving the work at the top undone until the work at the bottom becomes unavoidable.
The quickest way to the right page is to describe the surface. Cracks in a lot that still carries load are a crack sealing job. A grey, oxidised surface that is otherwise sound is a sealcoating job. Isolated failures need patching full depth, and a pothole that keeps coming back needs its base fixed. Widespread cracking on a sound base is in the overlay window, and a surface that moves under a loaded truck needs reconstruction. Water standing 48 hours after rain is a drainage problem first.
Every service page shows typical price ranges from national cost guides, with the guide named beside each figure. They are there so you know roughly what you are walking into, not as quotes. Lot size, access, how much patching is needed first and phasing around an operating business all move the number.
Keep the water out
Crack Sealing
Hot-pour sealant that closes every crack before winter water reaches the base.
Learn moreSealcoating
A sacrificial coat that shields the binder from sun, oil and fuel.
Learn moreInfrared Repair
Reheats a surface defect in place and fuses it, with no seam left.
Learn moreDrainage
Low spots and birdbaths corrected by restoring fall, before freeze-thaw reaches the base.
Learn moreAsphalt Maintenance
A yearly calendar for a lot, so cheap work happens before costly work.
Learn more
Repair what has already failed
Parking Lot Repair
Full-depth patching that rebuilds failed base instead of skimming over it.
Learn morePothole Repair
Full-depth pothole repair that fixes the failed base, not just the hole.
Learn moreConcrete Repair
Curbs, sidewalks, aprons and dumpster pads: the concrete that fails around an asphalt lot.
Learn moreAsphalt Curb
Low asphalt edges that steer water to inlets and keep tyres off planted islands.
Learn more
Resurface, rebuild or pave new
Asphalt Milling
Grinding off the worn top inch or two so a new surface keeps its grade.
Learn moreAsphalt Overlay
A new hot mix surface over a lot whose base still carries the load.
Learn moreAsphalt Reconstruction
A full-depth rebuild of base and surface once the base stops carrying load.
Learn moreAsphalt Paving
New commercial lots built in layers, sized for what actually drives on them.
Learn moreConcrete Parking Lots
Concrete where loads concentrate: pads, aprons, truck lanes and approaches, mixed for freeze-thaw.
Learn more
Striping, signs and accessible parking
Parking Lot Striping
Stall lines, arrows and accessible bays, with a drifted layout corrected as the paint goes down.
Learn moreFire Lane Striping
Red curbs and lane markings kept legible where traffic and sun are heaviest.
Learn moreThermoplastic Marking
Hot-applied lines, arrows and crosswalks for the spots where paint wears off first.
Learn moreCurb Painting
Painted curb faces that mark fire lanes, no-parking zones and island edges.
Learn moreParking Lot Layout
Stall, aisle and accessible-space plans drawn to the city manual before any paint.
Learn moreADA Compliance
Slope, aisles, signs and the state registration rule that resurfacing jobs run into.
Learn moreHandicap Parking Signs
Post-mounted accessible parking signs, set at the height and wording TAS asks for.
Learn moreBumps and Stops
Speed control, stall stops and impact protection, placed where they actually work.
Learn more
Driveways, private roads and yards
Asphalt Driveways
New asphalt drives and resurfacing for homes, with Amarillo cost figures and the permit rule.
Learn moreChip Seal
Sprayed binder and rolled stone that seals a sound surface and adds no strength.
Learn moreCrushed Asphalt
Recycled asphalt for drives, yards and lanes, priced by the ton, yard or square foot.
Learn moreCaliche Roads
Caliche roads and drives built from the caprock, with per-ton prices and what to ask.
Learn more
What every pavement job should include
- Ask for a written price with quantities on it before any work starts: area, thickness, milling depth if any, how much patching is included and where, and what is excluded
- Ask how much patching is needed before any sealcoat or overlay goes down, and whether it is in the price
- If the estimated construction cost reaches $50,000, plans submitted to TDLR under Texas Government Code chapter 469 before the building permit or construction
- Accessible stalls checked against the TAS 1:48 slope limit before they are repainted
- Striping laid back to the City's parking design standards, set out on the Amarillo parking lot code page
- A plan for working around an operating business, section by section; see when you can drive on new asphalt
- Ask for proof of license and insurance before work starts
Not sure which service your lot needs?
Describe what the surface is doing and ask which stage the lot is at before anybody quotes it.
Call (806) 375-4850